Retread Tire
Michelin X One Line Energy™ D2 Pre-Mold Retread / Recap
Michelin X One Line Energy™ D2 Pre-Mold Retread / Recap
Michelin X One Line Energy™ D2 Pre-Mold Retread / Recap
Michelin X One Line Energy™ D2 Pre-Mold Retread / Recap
/2

MICHELIN X One Line Energy D2 Pre-Mold / Recap Retread

Close
MICHELIN
X One Line Energy D2 Pre-Mold / Recap Retread
Select a dimension
back
Select a dimension
  • 445/50R22.5
Close
MICHELIN
X One Line Energy D2 Pre-Mold / Recap Retread
Select a dimension
back
Select a dimension
  • 445/50R22.5

WHAT IS RETREAD / RECAP?

Retread tires, sometimes referred to as a recap, recapped tire or remold, can help protect your bottom line and the planet. The X ONE LINE ENERGY D2 Pre-Mold Retread is a tire tread used in the remanufacturing process of a worn tire. Utilizing Michelin Retread Technologies’ 9-step manufacturing process ensures retreaded or recapped tires meet new-tire manufacturing standards. Having your fleet’s tires retreaded or recapped can help reduce the millions of tires that end up in landfills annually. Click here to find a Michelin Retread tire dealer near you.

WHY THIS RETREAD / RECAP?

 

EXCEPTIONAL FUEL SAVINGS

• New ultra-low rolling resistance levels designed to exceed SmartWay® and CARB requirements

• Compact Tread Design– designed for less tread squirm, providing energy conservation for fuel efficiency

LOWER COST OF OWNERSHIP

Designed to optimize Total Cost of Ownership with:
• Improved rolling resistance
• Mileage performance
• Inherent benefit of weight savings from New Generation Wide Based Singles

DRIVER CONFIDENCE

• Regenion Evolving Tread Design
– Provides stability in all weather conditions
– Delivers long lasting traction
– Straight, pass-thru grooves with evolving features appear later in tread life for long-lasting traction.

• Directional Design
– Provides improved resistance to irregular wear for driver satisfaction and long tread life

BENEFITS AND FEATURES

  1. Compact Tread Design – designed for less tread squirm, providing energy conservation for fuel efficiency.
  2. Directional Design – Provides improved resistance to irregular wear for driver satisfaction and long tread life.
  3. Regenion Evolving Tread Design – Straight, pass-thru grooves with evolving features appear later in tread life for long-lasting traction.
Michelin X One Line Energy D2 Pre-Mold Retread / Recap

Michelin X One Line Energy D2 Pre-Mold Retread / Recap

REFERENCE MATERIALS - DOCUMENTS

Michelin X One Line Energy D2 Pre-Mold Retread / Recap Product Sheet

Michelin Truck Tire Data Book

Michelin Retread Technologies, Inc. National Limited Warranty and Enhanced Michelin X One Casing Warranty

Michelin Retread Technologies Quick Reference Tread Guide

Technical specification

445/50R22.5
375 mm
22/32 nds
30389

Pre Mold Process
Also known as a "pre-cure" process. Tread rubber used in this process is molded and pre-cured by the tread rubber manufacturer, Michelin Retread Technologies (MRT). The appropriate tread is selected – design, width, thickness – and applied to a prepared casing. The casing is prepared by placing a cushion gum bonding layer between the tread and casing. The tire then moves to the chamber for curing.

You are using and outdated Web Browser..

You are using a browser that is not supported by this website. This means that some functionality may not work as intended. This may result in strange behaviors when browsing round.

Use or upgrade/install one of the following browsers to take full advantage of this website

Firefox 78+
Edge 18+
Chrome 72+
Safari 12+
Opera 71+