Retread Tire
Michelin X ONE LINE ENERGY T Pre-Mold Retread / Recap
Michelin X ONE LINE ENERGY T Pre-Mold Retread / Recap
Michelin X ONE LINE ENERGY T Pre-Mold Retread / Recap
Michelin X ONE LINE ENERGY T Pre-Mold Retread / Recap
/2
  • Durability
  • Fuel Savings

MICHELIN X ONE® LINE ENERGY T2 Pre-Mold Retread

Close
MICHELIN
X ONE® LINE ENERGY T2 Pre-Mold Retread
Select a dimension
back
Select a dimension
  • 445/50R22.5
  • 455/50R22.5
Close
MICHELIN
X ONE® LINE ENERGY T2 Pre-Mold Retread
Select a dimension
back
Select a dimension
  • 445/50R22.5
  • 455/50R22.5

WHY THIS RETREAD ?

Tread durability for longer life is enhanced using a winged tread, that provides maximum shoulder adhesion, along with waved groove bottoms to help prevent stone drilling.

Excellent handling comes from an optimized architecture featuring wide grooves that promote improved water evacuation.

Improved SmartWay® fuel economy over MICHELIN® X ONE® XTA® Pre-Mold delivered using Advanced Technology Compounds for reduced rolling resistance.

Excellent mileage delivered with optimized architecture to resist irregular wear and deep 13/32nds of tread depth. Up to 15% improvement in removal mileage when retreaded on a MICHELIN® X ONE® LINE ENERGY T casing vs. the X ONE® XTA® Pre-Mold on an X ONE® XTA® casing.*

13/32nds original tread depth

BENEFITS AND FEATURES

1. Optimized Architecture
Long Tread Life – Up to 15% improvement in removal mileage** with microsipes and a solid shoulder to resist irregular wear.

2. Advanced Technology Compound
No Compromise Rolling Resistance – Delivers low rolling resistance for fuel efficiency, without compromising mileage, durability and wet traction.

3. Winged Tread**
Shoulder Adhesion – Winged tread provides maximum tread-to-shoulder adhesion in high scrub applications.

Michelin X ONE LINE ENERGY T Retread / Recap

Michelin X ONE LINE ENERGY T Retread / Recap

REFERENCE MATERIALS - DOCUMENTS

MICHELIN® X ONE® Line Energy T Pre-Mold Retread Product Sheet

MICHELIN® X One® Tire Brochure

MICHELIN® SmartWay Retreads

Michelin Retread Technologies, Inc. National Limited Warranty

MICHELIN® Truck Tire Data Book

Michelin Retread Technologies Quick Reference Tread Guide

Technical specification

445/50R22.5
375 mm
13/32 nds
02555

Pre Mold Process
Also known as a "pre-cure" process. Tread rubber used in this process is molded and pre-cured by the tread rubber manufacturer, Michelin Retread Technologies (MRT). The appropriate tread is selected – design, width, thickness – and applied to a prepared casing. The casing is prepared by placing a cushion gum bonding layer between the tread and casing. The tire then moves to the chamber for curing.

Legal Footnotes

* Based on current pull points vs. MICHELIN X ONE® XTA® Pre-Mold Retread on a MICHELIN® X ONE® XTA® casing, using field testing and observation, when retreaded on a MICHELIN X ONE® LINE ENERGY T casing.

** Tread widths with two measurements have wings. The first number is tread base width in mm. The second number is the overall width, wing tip to tip.

LEGAL FOOTNOTES

* Based on internal tests against SmartWay® requirements. For more information on SmartWay® verified technologies, go to US: www.epa.gov/smartway or CA: https://www.nrcan.gc.ca.

You are using and outdated Web Browser..

You are using a browser that is not supported by this website. This means that some functionality may not work as intended. This may result in strange behaviors when browsing round.

Use or upgrade/install one of the following browsers to take full advantage of this website

Firefox 78+
Edge 18+
Chrome 72+
Safari 12+
Opera 71+