Retread Tire
Michelin X ONE XDS2 Pre-Mold Retread / Recap
Michelin X ONE XDS2 Pre-Mold Retread / Recap
Michelin X ONE XDS2 Pre-Mold Retread / Recap
Michelin X ONE XDS2 Pre-Mold Retread / Recap
/2
  • Winter certified
  • Fuel Savings
  • Regional

MICHELIN X One XDS2 Pre-Mold Retread

Close
MICHELIN
X One XDS2 Pre-Mold Retread
Select a dimension
back
Select a dimension
  • 445/50R22.5
  • 455/55R22.5
Close
MICHELIN
X One XDS2 Pre-Mold Retread
Select a dimension
back
Select a dimension
  • 445/50R22.5
  • 455/55R22.5

 WHAT IS RETREAD / RECAP?

Sometimes referred to as a recap, recapped tire or remold, retread is a tire tread used in the remanufacturing process of a worn tire. The X One XDS2 Pre-Mold Retread utilizes Michelin Retread Technologies’ 9-step manufacturing process to ensure retreaded or recapped tires meet new-tire manufacturing standards ­– protecting your bottom line and the planet. Having your fleet’s tires retreaded or recapped can help reduce the millions of tires that end up in landfills annually. Click here to find a Michelin Retread tire dealer near you.

BENEFITS AND FEATURES

Driver Confidence

Optimized Traction for Snow

1. Matrix Sipes provide inter-locking action which offers excellent traction and even wear

2. Zig-Zag Groove Walls provide optimized biting edges and excellent water and snow evacuation

3. Full Depth Sipes provide excellent traction throughout the life of the tread

4. V-Shaped Transverse Shoulder Grooves promote stone, mud, and snow evacuation

Increased payload (2)

The X One advantage with no loss in traction

Same legendary snow traction as the Michelin XDS2+ Pre-Mold Retread / Recap(1)

Potential Weight Savings - 365 lbs more payload than dual tires(2)

Michelin X ONE XDS2 Pre-Mold Retread / Recap

Michelin X ONE XDS2 Pre-Mold Retread / Recap

REFERENCE MATERIALS - DOCUMENTS

 Michelin X ONE XDS2 Pre-Mold Retread / Recap Product Sheet

Michelin X ONE XDS2 Pre-Mold Retread / Recap Promise Card

Michelin Retread Technologies, Inc. National Limited Warranty and Enhanced Michelin X One® Casing Warranty

Michelin Retread Technologies Quick Reference Tread Guide

Technical specification

445/50R22.5
375 mm
25/32 nds
14270

Pre Mold Process
Also known as a "pre-cure" process. Tread rubber used in this process is molded and pre-cured by the tread rubber manufacturer, Michelin Retread Technologies (MRT). The appropriate tread is selected – design, width, thickness – and applied to a prepared casing. The casing is prepared by placing a cushion gum bonding layer between the tread and casing. The tire then moves to the chamber for curing.

LEGAL FOOTNOTES

(1) Based on 3PMSF ECE certified ISO test procedure, snow traction results for Michelin X One XDS2 Pre-Mold and XDS2+ Pre-Mold duals were statistically equal compared to Standard Reference Test Tire.

(2) Based on replacing eight Michelin XDS2+ dual retreads on 11R22.5 casings with Alcoa® Ultra One wheels with four Michelin X One XDS2 retreads on 455/55R22.5 casings with Alcoa® Ultra One Wheels. Actual results may vary.

(3) Tread widths with two measurements have wings. The first number is tread base width in mm. The second number is the overall width, wing tip to tip.

You are using and outdated Web Browser..

You are using a browser that is not supported by this website. This means that some functionality may not work as intended. This may result in strange behaviors when browsing round.

Use or upgrade/install one of the following browsers to take full advantage of this website

Firefox 78+
Edge 18+
Chrome 72+
Safari 12+
Opera 71+