MICHELIN XZE®2 Pre-Mold Retread
All-position retread designed for regional applications requiring exceptional tire wear resistance.
WHY THIS RETREAD ?
Compound optimized for regional and over-the-road operations.
Center grooves for good water evacuation.
Performs well in both high scrub and low scrub conditions.
20/32nds original tread depth
BENEFITS AND FEATURES
1. Application Specific Compounds
Long Tread Life – Helps deliver scrub resistance, especially for demanding, high scrub operations.
2. Wide Tread Design
Long Tread Life – Distributes force over a larger contact area.
3. Rib Edge Micro Sipes
Long Tread Life – Protects against the early onsite of irregular wear.
4. Center Groove
Confident Handling – Center grooves deliver great water evacuation.
MICHELIN Edito xze 2 zoomer Tire
REFERENCE MATERIALS - DOCUMENTS
MICHELIN® XZE®2 Pre-Mold Retread Product Sheet
MICHELIN® Truck Tire Data Book
Michelin Retread Technologies Quick Reference Tread Guide
Michelin Retread Technologies, Inc. National Limited Warranty
|Tread Width||240 mm|
|Tread Depth||20 inch|
Pre Mold Process
Also known as a "pre-cure" process. Tread rubber used in this process is molded and pre-cured by the tread rubber manufacturer, Michelin Retread Technologies (MRT). The appropriate tread is selected – design, width, thickness – and applied to a prepared casing. The casing is prepared by placing a cushion gum bonding layer between the tread and casing. The tire then moves to the chamber for curing.